Unbrick Redmagic Astra Pad NP05 – Hard Brick Fix Firmware

If your Redmagic Astra Pad NP05 is stuck on black screen, Qualcomm 9008 Mode, or completely dead after flashing the wrong firmware – this guide is for you.
We provide a paid, password-protected firmware file to fully unbrick and restore your device to working condition.

🚨 When Do You Need This?

• Device not turning on / only detected as Qualcomm HS-USB QDLoader 9008.
• Stuck after wrong ROM / boot.img / recovery flash.
• Bootloop or no fastboot/recovery access.
• Hard brick after flashing with SPFlash/EDL tools.

✅ What You Get

• ✔ Full stock firmware to unbrick Redmagic Astra Pad NP05.
• ✔ EDL (Emergency Download) files – ready for UnlockTool / Qualcomm Flash Tool.
• ✔ Password-protected ZIP (paid access only).
• ✔ Remote support available if needed.

📥 Download (Paid File)

The firmware is locked and requires a password after purchase.
Download link:

Download Redmagic Astra Pad NP05 Unbrick Firmware

🛠 Flashing Method – How to Unbrick (UnlockTool / Qualcomm)

📌 Requirements:

• Windows PC + USB cable
• Qualcomm USB Drivers installed
• UnlockTool or QPST / QFIL / Qualcomm Flash Tool
• Firmware (from link above) + Password after payment

📍 Steps (UnlockTool Method):

1. Power off the device completely.
2. Enter EDL Mode (9008):
   – Hold Volume Up + Volume Down and connect USB
   – Or test point method on motherboard (if fully dead)
3. Open UnlockTool → Select Redmagic / NP05.
4. Load the extracted firmware (after entering password).
5. Click Start Flash and wait until “Success”.
6. Reboot your Astra Pad – device will boot to stock system.

📍 Steps (Qualcomm QFIL):

1. Open QFIL → Select “Flat Build”.
2. Load prog_firehose_ddr.mbn from firmware folder.
3. Select rawprogram.xml and patch.xml files.
4. Click Download and wait until completed.

💬 Contact to Purchase Password / Support

⚠ Important Notes

• Firmware is paid and secured with a password – no free access.
• Use at your own risk – flashing wrong files may damage your device.
• We also offer remote unbrick service via TeamViewer / UltraViewer.